Vintage Coin-Operated Machines

258 Items

1924 Pepsi Cola Double Dot Bottle Rare Barrel Pattern

A good condition bottle. Little to no wear on top or sides. 'Pepsi Cola Trade Mark Rec' embossed on one side. 'Pepsi Cola Cap 6 Flu Ozs' embossed on the other side. Bayard, West Virginia on the bottom the bottle. However it does have a large chip off the bottom edge, which is not noticeable when on display.

:: SOLD

1930's Kodascope Eight-33 8mm Movie Projector

Condition: Excellent Used Size: 10 inches tall by 9 inches wide and 5 inches deep Country of Origin: United States Manufacturer: Eastman Kodak Company Eastman Kodak Company built this wonderful old machine long ago. It has wire wound spring drive belts that last forever and an old brush/armature motor that is as durable as they come. This great unit has a variable speed knob that will allow a wide range of speed adjustment (perfect for transferring old 8mm movies to DVD). It also has a frame...

:: ITEM NOT FOR SALE

1931 Peo Sales Corp Miniature Baseball Trade Stimulator

1931 "Miniature Baseball World Champion" Coin Operated Game. One of the most intriguing coin-operated baseball games of the 1930s. This piece titled "Miniature Baseball World Champion," is all original and accepts pennies for an extremely fun game that flips steel balls in a spiral to obtain hits or an out. Dimensions are 16.5" x 10.25" x 8.5". 1 Cent "World Champion" Flip Baseball Trade Stimulator c1931, by Peo Sales Corp. Rochester, NY., restored w/ key. Gottlieb made the same machine...

:: SOLD

1932 Gottlieb Play-Boy Mechanical Pinball Machine

Very nice original game that works flawlessly. The cabinet was refinished at some point in its life and shows very well. Coin mechanism works smooth. The back door has a newer lock. The marquee is in excellent condition. Playfield has been taken apart, cleaned, polished and waxed. 10 balls for 5 cents, with 5 cards each if playing two players. Game advertised as 24 inches long by 16 inches wide.

:: ITEM NOT FOR SALE

1933 Genco Sky Ride 1 Cent Mechanical Pinball Machine

A fully mechanical game. 7 balls for a penny. Game sold for $12.50, a matching metal stand was $1.50 extra, back in 1933. Object is to manipulate the balls into the higher scoring holes. There is a tilt mechanism so be careful. Add up your score total. This is/was a gambling game. This game took its name from an aerial ride at Chicago's World's Fair of 1933. Walnut cabinet is 33 1/2 inches long and 16 1/2 inches wide. The Sky Ride was an attraction built for the Century of Progress Exposition (or World's...

:: ITEM NOT FOR SALE

1933 Genco Sky Ride 5 Cent Mechanical Pinball Machine

A very nice condition machine. A fully mechanical game. 10 balls for a nickel. Game sold for $12.50, a matching metal stand was $1.50 extra, back in 1933. Object is to manipulate the balls into the higher scoring holes. There is a tilt mechanism so be careful. Add up your score total. This is/was a gambling game. Walnut cabinet is 33 1/2 inches long and 16 1/2 inches wide. 10 New Steel Balls The Sky Ride was an attraction built for the Century of Progress Exposition (or World's Fair) in Chicago, Illinois (located...

:: SOLD

1933 Mills 25 Cent Castle Front Slot Machine

A very nice smooth working 25 cent slot machine. Comes with a nice oak stand with a leaded blue glass front door. This is a reproduction of the original. This is nearly an exact mechanical and cosmetic version of the antique version. This was probably made in the 70's and of commercial quality. An original antique would fetch a minimum value of $1800.00

:: SOLD

1933 Northwestern Gumball Machine

Glass globe mounted on octagonal base with nickeled flap marked with raised letters Northwestern Morris Illinois. Complete with functional key and lock. 15.5" high 8" diameter.

:: SOLD

1934 Genco Official Baseball Mechanical Pinball Machine

All mechanical pre-war pin. Was professionally restored. 100% working game. Notes: 10 x 37 x 19’’ wood coin operated game made by Genco. Originally marketed as the “Home Run Smash Game that is Going to Start the Biggest Money-Making Play in Coin Machine History.” The original cost back in 1934 was a whopping $35. Similar to the Rockola game of the same era, however the quality of this piece is far superior. The graphics are amazing with illustrations of a pitcher, catcher and a baseball diamond. Metal figural...

:: SOLD

1934 Rockola World Series Mechanical Pinball Machine

Beautiful unrestored game, that is 100% functioning. All original except for marquee, coin box, coin door, and decals. World Series 1934 baseball pinball, Rockola, a pure mechanical pinball game (uses no electricity), not a pitch and bat, uses a standard pinball type cabinet. Header denotes Play Ball! A very cool little game where if the player gets a hit, the ball is fed to an "infield". This is mechanical animation where the balls show the players on base.

:: ITEM NOT FOR SALE

1934 Rockola World Series Mechanical Pinball Parts Machine

Parts machine. Looks like it's all there for the game, no glass, legs, coin slide, or front door. Playfield is in great condition, rails and pins are there. Mechanics look all there under the playfield, but I'm not sure, so please ask questions. Could be a restoration project or use for hard to find parts. I'll include a NEW star wheel.

:: SOLD

1935 5 Cent Watling Blue Seal Slot Machine

5 Cent Watling Single Jackpot No. 40 "Blue Seal" Gooseneck Bell Slot Machine. with rare side dispenser. Great working machine that was recently gone through, cleaned up, lubed and tuned. New remanufactued coin box. All original, and working. Looks to of been restored a long time ago as it is too nice.

:: ITEM NOT FOR SALE

1936 Chicago Coin Ginger EM Pinball

A beautifully perfect working game. Shows very little wear. Does have remnants of a battery acid leak, but did not do any damage other than some staining on the inside bottom of cabinet. Original legs, original coin slide fully working for a penny, original key and lock. Playfield has been cleaned, polished and waxed. All wood has been oiled. Original 8 white glass balls, 6 kickers, with a loop to loop shoot around curves, and down elevated rails. They made 967 of these games (confirmed). Converted DC battery to an ATX power supply. It...

:: SOLD

1940 Chicago Coin All American Pinball

A perfect project for restoration, or an extremely good parts machine. Really only wrong is a broken back glass. It is 100% complete. We may just turn it into a coffee table if nobody buys it. This football themed game has a lot of California history. Playfiled has been cleaned, polished and waxed. All plastics are perfect. Has all original light bulbs.

:: SOLD

1940 Keeney Texas Leaguer Baseball Game

Texas Leaguer, Keeney, floor model. Smaller version of the later 1958 Keeney League Leader baseball game. A small 3/8" ball bearing rolls down an incline and flys through the air. Player must try and bat the ball. Difficult to do (because the ball is so small), a very challenging game. Scoring is pretty unique. If a ball is batted into a backboard run pocket, the ball is routed to the lower right scoring panel. Player must add up the number of balls to get their score. For example, two balls in the "5" scoring panel means 10...

:: SOLD

1940 Original Pepsi-Cola Syrup Container With Lid

Pepsi-Cola syrup drum, "The Best 5 Cent Drink", early double-dot metal drum with original lid, very nice condition, 17"H x 16"W.

:: SOLD

1940's Pepsi Double Dot Metal 6 Pack Bottle Carrier

A very nice all original Pepsi Double Dot Cola 6 Pack carrier. No rust, in excellent condition for its age. The handle is 8-1/4 inches across x 9/16 inches wide & is 9-3/8 inches tall but slides up to 10-7/8 inches tall. The bottle basket area is 8-1/4 x 5-1/4 x 3-7/8 inches tall.

:: SOLD

1940's Pepsi Double Dot Metal 6 Pack Bottle Carrier - Garwood NJ

This is an EXTREMELY RARE bottle carrier! It is made of all metal by Union Products Co., Garwood NJ. The handle is 8-1/4 inches across x 9/16 inches wide & is 9-3/8 inches tall but slides up to 10-7/8 inches tall. The bottle basket area is 8-1/4 x 5-1/4 x 3-7/8 inches tall.

:: ITEM NOT FOR SALE

1941 Vendo Jr. Model 123 Coca-Cola Spin Top Machine

Original Vendo Jr. coke machine. Very nice original condition with hard to find original cap catcher and side grills, get real cold when plugged in. All sides have embossed lettering including the coin unit "dog house". These machines were made in the 1930's-40's by Westinghouse for the Vendo company. The early Vendo's Jr's. were water and ice cooled and the later ones have the refer unit. According to Jeff Waters book of Classic Soda Machines, states the later refer models are more sought after, like this one. The...

:: SOLD

1945 Gottlieb Stage Door Canteen Flipperless Pinball

This game has the honor of being the first pinball machine Gottlieb manufactured after World War 2 ended. The best part, is the game still looks almost brand new. The playfield, cabinet, and backglass are in amazing shape for its age. The game plays great overall. Please note this is FLIPPERLESS game (flippers were not invented until 1947), but believe it or not that doesn't make this game any less addictive. Comes with another coin door, faded but not cracked like the one on the machine (see photos).

:: SOLD

1946 Central Manufacturing Hi Fly Trade Stimulator

It's a table top trade stimulator made by The Central Manufacturing Co. of Chicago, Illinois. The game works by inserting a nickel into the left or right coin slot, pull back a spring loaded arm, and let 'er fly!! The coin itself is launched and mazes its way through the playfield into the categories of hit, double, triple, home run, or out. The field holds the nickel in the categories until the tilt lever at the top of the game is pulled and resets the field to empty. The game itself and all mechanics do work, but could use a good...

:: SOLD

1946 Chicago Coin Goalee

This is a project game that does not work, but does have all the parts. Veneer needs to be replaced on the outside of the cabinet. Play-field is in pretty good shape except a scrap under one of the players from a hockey stick rubbing. Outside glass is in excellent condition. Inside glass pieces need to be replaced. What you see is what you get. Does not power up, just the internal service light comes on and that's it.

:: SOLD

1947 Atlas Tilt Test Trade Stimulator

1 cent Tilt Test Trade Stimulator. It operates flawlessly, and looks great. It was restored at one point in it's recent life with new paint, reproduction glass, and stained cabinet, so it looks amazingly new. Fun and difficult to play, not an easy game to win.

:: SOLD

1947 ECO Tireflator Model 97 Gas Station Air Pump Unrestored

This is a wall-mounted ECO Tireflator Model 97 Gas Station air pump used in most gas stations years ago. It is an original unrestored.

:: SOLD

1948 Exhibit Supply Company Samba Pinball

A very nice unrestored EM pinball game from 1948 by ESCO called Samba (the dance style). The playfield is superb, the backglass is next to flawless, the cabinet is in great condition. All the plastics are perfect and rubbers are all new. The playfield glass was removed for the photos. 5 balls for 5 cents. Flippers (4), Scoring bumpers (10), Kick-out holes (4), Outhole has a separate kick-back lane ("Come Back Kicker") to score 25,000 points. The game measures 52 inches long, 23 inches wide, and 63 inches tall.

:: SOLD

1948c Mills Hightop 5 Cent Slot Machine

This classic design slot machine style is probably the most recognized slot machine design ever made. One of Mills best sellers. The machine has been restored, plays and pays out properly with all original parts.

:: ITEM NOT FOR SALE

1949 Bally Heavy Hitter Pinball Arcade Game Restored

A very nice fully restored game, that is 100% functioning. Restored in 2009. Comes with a rare stand that matches the game colors, made of hard wood. One player. Small pitch and bat, 32.5" long by 15" wide by 55" tall with the floor stand. Backglass running man unit uses five 5/8" steel balls. and one 5/8" ball for the playfield. Top glass size is 26" x 14" x 3/16". Despite its small size (15" x 27" footprint). It's fun because of its very fast play. The pitched ball is...

:: SOLD

1949 Tokheim 300 Mobil Gas Pump and Oil Pump Restored

Beautifully restored 11-49 Tokheim Mobilegas Gas Pump and matching Oil Pump. Gas pump has a beautiful oak mounted base, with rubber casters that can move on the most delicate floors with ease.

:: ITEM NOT FOR SALE

1949 Williams Star Series Pitch and Bat Pinball Game Restored

A high quality restoration. Everything has been gone through to be cleaned, replaced and or massaged to perfect working condition. This game is 100% working, and looks brand new. One player, backglass style running man unit with players that run the backglass basses. The interesting thing about this game is the pitching unit; it does *not* use a motor like later baseball games to pitch the ball. Instead it is a manual ball pitch, where the player pushes in a plunger on the front left of the cabinet to pitch the ball (much like the...

:: SOLD

1950 ABT 5 Cent US Marshall Shooting Game

A.B.T. MFG. Co. "Silver Dollar" Saloon. 5 Cent U.S. Marshall Pistol Target Skill Game, on legs w/ key. This is an older restoration by the previous owner, but still in great shape. It's one that is used regularly around here, and works great.

:: SOLD

1950's Cavalier 72 Coca Cola Vending Machine

Unrestored Coca-Cola C-72 machine. Turns on when plugged in. Looks to be all there, and all original. New wiring harness to be installed. One of the most collectable Coke machines, the Cavalier 72 coke machine has a very small profile, rounded corners, and vends 12 oz and smaller bottles from 9 trays, providing ample selections. After depositing a coin, the "Have a Coke" button lights up, until you pull out a soda. Vends 72 Bottles -- 6.5 oz to 12 oz bottles -- Pre Cools 17 -- Size 56.75″ high,...

:: SOLD

1950's Cavalier CS-96 Coca-Cola Machine

I have a very nice working original 96 bottle Coke Machine. Yes that is 96 bottles of Beer of whatever you want to get cold. Perfect for the up and coming summer heat. All working with coins, and can be modified to not take coins. Get's nice and COLD! SPECIFICATIONS: Vending Capacity: 96-6.5oz - 12oz Bottles Precool Capacity: 17 Bottles Dimensions: 67" high, 24 3/4" wide, 21 7/8" deep Production Dates: Late 1950's

:: SOLD

1950's Oak Acorn Gumball Penny Machine Restored

A beautiful restored gumball machine. Takes a 1 cent penny to get a gumball. The glass globe is flawless with the Leaf Rain-Blo Bubble Gum decal (copyright 1952). Everything works as it should, has original key.

:: ITEM NOT FOR SALE

1950's Vendo VMC 88 Pepsi Machine Restored

A Vendorlator 88 model or VMC-88 as its model number. Vending capacity: 88 bottles, Late 1950's. Just completed restoration as of October 2016. This is the correct color scheme with the solid 1 color. They did make a 2 tone version, but this is not that one, as this is an earlier machine.. Pepsi blue paint color matched to my same era travel cooler. Powder coated all the insides, new chrome and cadmium plating. Stainless screws throughout. Original motor/compressor completely restored with new style starter. Gets...

:: FOR SALE

1950's VMC 44 Coca Cola Vending Machine

Unrestored Coca-Cola VMC-44 machine. 100% working, and get very cold. Looks to be all there, and all original, except for somebody started to sand on the paint. The VMC 44 is very similar to the Vendo V-44 except for cosmetic differences. The most noticeable difference is the VMC 44 lacks the chrome coin entry bezel. The lack of this chrome bezel may attribute to the VMC 44's second place behind the Vendo V-44 with many collectors. All things considered, the soda machine occupies very little floor space! Vending Capacity:...

:: ITEM NOT FOR SALE

1952 Seeburg 100 Model C Select-o-matic Jukebox

Purchased over 30 years ago. 100% working and maintained. Have the original keys and the manual. Color wheels work. Front tubes have been changed from glass to chrome, as these get broken over the years anyways. Located in Lake Arrowhead, CA.

:: FOR SALE

1957 Pepsi-Cola Bottle

Very nice unscratched glass March 1957 6 1/2 oz Pepsi-Cola bottle.

:: ITEM NOT FOR SALE

1957 Williams Baseball Pitch and Bat Pinball

A nice fully working game. Back glass is flawless. New home run plexiglass. New tempered play field glass. Cleaned and polished playfield. Recently serviced 7/13.  Later coin door, however it does come with an original door that needs to be installed. This is a one player game, side glass cutouts in cabinet, scores grand slams and previous hi-score, base runners in a running man unit. Considered to be the most memorable and "classic" of the 1950s Williams pitch and bat games.

:: SOLD

1957 Williams Ten Strike Bowling Game

Non working game, but looks to be complete. Has new backglass, chrome coin door (dented), chrome legs, new back doors (unpainted). reproduction dome. Ten Strike 5 footer, Williams, two players, mechanically animated manikin bowling game. Does not score like regulation bowling; Strikes are worth 30 points, spares are worth 20. In a "blow" situation, each pin is worth one point. Awards replays for a match, and for high scores.

:: SOLD

1957 Williams Ten Strike Bowling Game

100% working game. Original dome, and coin bar. A descent restoration done several years ago by somebody in Florida for 2 owners previous. Powder Coated Legs Refurbished Back Glass Rechromed Cigarette Holders Restored Playfield and Electronics

:: ITEM NOT FOR SALE

1957 Williams Ten Strike Bowling Game

This is a very nice complete game in non working condition. I purchased this game for my collection in effort to restore it. I have been unable to complete the restoration due to personal issues. The lower main cabinet has been sanded down and glued where it needed to be, needing to be finished. This game comes with a stencil kit for paint.

:: SOLD

1959 Williams Pinch Hitter Pitch and Bat Arcade Game Restored

Fully restored game as of January 2012. Pinch Hitter, two players, multiple pitches (fast and curve), game-to-game carry over feature (each grand slam lights a letter of the word "pinch hitter"; lighting the whole title gives a replay), novelty version of Deluxe Pinch Hitter (which gives replays).

:: ITEM NOT FOR SALE

1961 Chicago Coin Pro Basketball Arcade Game

Fairly rare piece and one of the more challenging basketball arcade games. The cabinet is solid and was sanded down to the wood and stained. The game works perfectly, also it was just serviced (contacts cleaned and adjusted). The playfield and men are in terrific condition. Has the original dinette legs. The game looks fantastic. Btw, another one was listed on ebay not too long ago for $6,500.

:: SOLD

1964 Williams Mini Golf Pinball Machine

Williams Mini Golf, two players, manikin golfer. Must shoot holes one to nine, in order, with a limited number of shots. This has had a full restoration, and is great working order. New chrome throughout. New back glass. Restored by Fabulous Fantasies to original colors and theme.

:: SOLD

1965 Bally Bullfight EM Pinball Machine

In good working condition. Does need to be shopped, but is working. Flippers (2), Pop bumpers (3), Mushroom bumpers (7), Slingshots (3), Right outlane ball return gate. Hitting an Advance causes the Rotary Target Selector to step one position. Each Selector position lights different targets and rollovers for increased values. The selected combination of values carries over to the next game. Tuff-coat playfield.

:: SOLD

1965 Vintage Cheerios Metal Slinky in Box

General Mills/Slinky. Circa 1965. This metal Slinky was a mail-away cereal (Cheerios in the mid-1960s). It is packaged in a plain white mailing box with the return address “A.R.M., PO Box 5001, Kalamazoo, MI 49003” (A.R.M. was a fulfillment company for cereal box offers). Slinky is silver metal and measures approx. 2-3/4” across. Excellent condition. Box has minor wear (from mailing).

:: ITEM NOT FOR SALE

1965 Williams Double Play Pitch and Bat Arcade Game

Recently serviced and ready to go to a new home. One of the greatest E.M. Pitch and Bat games ever designed. A 9+ on the "Play Value" scale. One player, completing game title awards replay (carry over feature), hitting seven targets in one games awards extra inning, fast and slow pitch (randomly selected), animated infield "players" that catch the ball then turret around and throw the ball to another base turret for double plays, backglass running man unit, playfield lights to simulate men running to the bases,...

:: SOLD

1968 Williams Ball Park Pinball Pitch and Bat Pinball

Very nice fully functional game. Comes with reprint manual, schematics, and warrantee card. Back glass has been replaced with a new reproduction. Original and very nice playfield glass. New steel balls, and light bulbs. New ball flap, with correct brass rivets. Coin mechs work with dimes and quarters. Playfield 10 - Backglass 10 - Cabinet 8 - Mechanical 10

:: SOLD

1969 Midway Sea Raider Upright Restored

This is a fully restored game, in mint condition. Sea Raider, by Midway, electronic sound, a submarine game with the player looking through a periscope to shoot ships. Inside the machine is lit up with a blacklight tube. As the game starts boats start cruising by across the back of the scenery, and the front glass lights up "torpedoes ready to fire". Look through the periscope and aim in front of the ship, then press the fire button on the right handle. An electronic "whoosh" sounds is made as the torpedo heads towards...

:: SOLD

1971 Gottlieb Batter Up Pinball Machine

100% working game in beautiful condition. Gottlieb Baseball pinball, Gottlieb Batter Up pinball. Center turret shooter pinball, 2" flipper bats. They made 2350 Gottlieb Baseball pinballs in the replay version, and 560 Gottlieb Batter Up add-a-ball pinballs.

:: SOLD

1972 Ouija Board Game in Original Box

This is a very good condition original board game by Hasbro. Appears to be from 1972 and has all the parts with instructions.

:: ITEM NOT FOR SALE

1973 Williams Fun-Fest Pinball

100% working game. Playfield is in VERY GOOD condition. Cabinet is solid, but needs paint. Back glass has a lot of flaking. Playfield glass in very good condition. No back door. Can include a perfect back glass for an additional $145.00 This Williams 4-player machine features a swinging target in the center of the playfield, a ball return kicker from the left ball exit, a return ball gate from the right ball exit, and a center pop-up post between flippers. It also has DC thumper bumpers. The top center hole is good for a free...

:: SOLD

1975 Chicago Coin Big League

Game is working. Recently gone through, lubed and cleaned up. Cabinet 9, Playfield 10, Bezel 6. Description: Big League, Chicago Coin, two players, a pitch and bat in a video game style cabinet, nixey tube scoring, day glow colors, electronic version of Baseball Champ.

:: SOLD

1977 Bally Evel Knievel Pinball

100% working game with all new rubbers. 1977 Evel Knievel Bally Professional Home Model. 4 player, 5 ball with art work by Paul Faris. It has 3 flippers and nice action. Bally Manufacturing Co.

:: SOLD

1978 Midway Space Invaders Upright

Cabinet is water damaged and not repairable, unless you want to use this as a template to build a new cabinet. The electronics show no corrosion. I did however plug it in and got nothing. I'll continue to work on this as time goes on, but can be purchased as is for now.

:: SOLD

1979 Atari Asteroids cocktail table

Here is an original Atari Asteroids cocktail table. It features a real 15" black and white vector monitor for playing what is arguably the most successful and influential arcade game from the 1980's - ASTEROIDS! This is not a cocktail table that plays 1000's of games by utilizing crappy emulation on a PC based system. No delayed micro switch joystick controls, no sound glitches, no graphics issues. This is a real, original cocktail table as produced by Atari...

:: FOR SALE

1979 Atari Asteroids Cocktail Table Game

Very nice working unrestored game. 100% original, complete and working. Glass is very nice, screen is perfect. Coin mech works, but is set on free play.

:: SOLD

1979 Atari Asteroids Stand Up Arcade Game

Cabinet is very solid. Side art is perfect. New control panel overlay. New buttons and leaf switches cleaned and serviced. Game works excellent. Monitor has been re-capped and soldered for longevity.

:: SOLD

1979 Atari Asteroids Stand Up Arcade Game

Very nice game. Fully functional. Cabinet is very solid with no cracks, dents, or water damage. Perfect game to do a restoration on. Your space craft is dangerously situated among fast moving asteroids in an asteroid belt that can destroy your ship on contact. Armed with a front mounted weapon and the ability to hyperspace, you fly through the debris, destroying each rock one piece at a time. Alien saucers visit the playfield from time to time with an eye towards destroying your ship!

:: SOLD

1979 Atari Asteroids Stand Up Arcade Game

A very nice 100% working Asteroids game. New control panel overlay. Monitor was re-capped for longevity, so it's nice and bright and crisp.

:: SOLD

1979 Atari Asteroids Stand Up Arcade Game

Cabinet is solid. Side art is good to fair. Game works excellent. Control panel is very good for it's age. Monitor is bright with no burn. 100% original, comes with original coin box. Great for a restoration, or just enjoy it as is. Has the early board that says 'Asteroids by Atari' REV1.

:: SOLD

1979 Atari Asteroids Stand Up Arcade Game Restored

Excellent condition Asteroids Arcade Game (restored). The Highest Quality restoration possible. Like new, but better. The cabinet was fully sanded and painted with new side art, and vinyl. New silkscreened control panel from Arcade Metal Parts. All buttons, and switches are new. All boards, and the monitor has been gone through, fixed and or replaced as needed. The coin door has been restored complete and fully functioning. Monitor bezel is new and so on. Every nut, bolt...

:: ITEM NOT FOR SALE

1979 Atari Lunar Lander Stand Up Arcade Game

 Very nice all original unrestored Lunar Lander machine. Re-Capped GO5-801 monitor. To be restored.

:: ITEM NOT FOR SALE

1979 IPM Invader Cocktail Table Arcade Game

Nice working game. Needs glass top. Destroy waves of approaching aliens with your ground cannon. Flying saucer drops additional aliens during battle. Coffee break intermissions appear after every third level. It plays just like Space Invaders, with identical graphics. It uses a color monitor instead of a b/w monitor with a color overlay. Information Website

:: SOLD

1979 Williams Flash Pinball Arcade Machine

Playfield is a 7 out of 10. New rubbers. Plastics are warped but not cracked or broken anywhere (can be straightened). Backglass is 8 out of 10. Cabinet is great 9+ out of 10. 'Flash' was the first game from any manufacturer to have a dynamic background sound during gameplay. It is also the first game from any manufacturer to use Flash Lamps, which provide a temporary burst of flashing light intended primarily for the sake of its visual effect, in contrast to the usual playfield lamps that either provide constant general...

:: SOLD

1980 Atari Asteroids Deluxe Stand Up Arcade Game

Asteroids Deluxe Description Pilot a spaceship equipped with shields and auto-fire as you blast through level after level of rotating asteroids. UFOs and multi-segmented Killer Satellites take chase, searching for an opportunity to destroy your ship. Game Introduction Asteroids Deluxe features modified gameplay intentionally designed to challenge players who had mastered the original Asteroids. Hyperspace was replaced with a new option...

:: SOLD

1980 Atari Asteroids Deluxe Stand Up Arcade Game

This game is 100% working. Has been checked, and cleaned. All the metals have been powder coated. Coin door has been rebuilt. New CPO and buttons. The monitor and board have been serviced with new caps. No screen burn. Has the rare anti-glare monitor bezel.

:: SOLD

1980 Atari Battlezone Cabaret Arcade Game

This game is very clean, all the electronics look great (see photos). Sound is excellent. Controls are excellent. 100% original. Monitor has been restored with new caps, and solder for longevity.

:: SOLD

1980 Atari Centipede Cocktail Arcade Game

All original game in excellent condition. Cabinet is perfect with no flaws what so ever. Game has been used in a home for over 10 years and been well taken care of.

:: SOLD

1980 Atari Centipede Stand Up Arcade Game

This game is in good shape, all the electronics look great (see photos). Cabinet shows some wear, but is solid. Sound is excellent. Controls, marquee, monitor bezel, and glass are in great shape. 100% original. Monitor has been re-capped and soldered for longevity.

:: SOLD

1980 Atari Missile Command Cabaret

Very nice unrestored 100% original cabaret/mini game. Works great. Using three atomic missile launching bases you defend your cities against incoming missiles. Enemy missiles may separate into several missiles so shoot them down early because you only have a limited number of missiles.

:: SOLD

1980 Atari Missile Command Upright

100% working game in a solid cabinet. Currently set on free play for hours of fun with no coins. All buttons and trackball are woking. Trackball cleaned and oiled at best as we can get it. Come play it before you take it home.

:: SOLD

1980 Atari Missile Command Upright

100% working game. Cabinet is solid with no wood damage. Side art is in good condition spite it's age. Come play the game and then take it home.

:: SOLD

1980 Atari Missile Command Upright Arcade Game

100% working game. Cabinet is solid with no damage. Monitor was re-capped for longevity, and is very bright. Cleaned inside and out. Comes with optional New trackball kit for an additional cost.

:: SOLD

1980 Atari Missile Command/Super Missile Command Cabaret

Perfect 100% working machine. Comes with Multi Game Missile Command and Super Missile Command. Cabinet is in near perfect condition. The wood grain is flawless. Control panel shows no wear. Roller ball and all buttons work perfect.

:: SOLD

1980 Atari Tempest Cabaret Arcade Game

A hard to find sized game. Game works but plays blind. Needs new transistors on the monitor, and could use new t-molding. 100% original and in descent condition for it's age.

:: SOLD

1980 Atari Tempest Stand Up Arcade Game

Game is fully functioning and in perfect condition. All metals have been powder coated flat or textured. Coin door has been fully restored and complete. Cabinet is in perfect original condition. Marquee and Control Panel are ready for overlays (not included). New caps and transistors have been installed along wht a Low Voltage board. Logic Board is working perfect with the Tubes mod.

:: ITEM NOT FOR SALE

1980 Choice-Vend CVC-223 Pepsi Machine

All original working machine with the classic Pepsi Colors. Works and gets very cold. Have added a bypass coin mech switch that can be accessed through the bottle opener hole. 5 choice selecton. 223-10oz-12oz Cans. 79" tall 26 1/2" deep 30" wide - approx. 580 lbs

:: FOR SALE

1980 Midway Hangly-Man (Pac-Man) Cabaret Arcade Game

A very nice 100% original game, except for the hack. Privately owned in a home since early 1980's. Cabinet is very solid, does show some wear and tear from owners moving game from home to home. Glass bezel is a perfect 10, marquee is also perfect 10. Monitor recapped May 2012. Hangly-Man is a hacked clone of the Pac-Man arcade game. It appeared sometime around 1981, at the height of the Pac-Man craze. Hangly is said to be an Engrish corruption of the word hungry. The word only appears in...

:: SOLD

1980 Midway Pac-Man Cabaret Arcade Game

Excellent working condition Mini Cabaret Pac-Man game. Has the High Score save kit with initials installed. Comes with Hangly-Man rom set, and original rom set. New light bulbs, new leg levelers. Brand new silk screened CP and overlay from Arcade Metal Parts.

:: ITEM NOT FOR SALE

1980 Midway Pac-Man Stand Up Arcade Game

This is a 100% working game. All original with glass bezel. Side art is great for it's age. A yellow, pie-shaped character named Pac-Man runs along inside a maze, eating dots as it avoids four ghosts. Each ghost has its own unique personality and gobbling one of the four super dots makes Pac-Man invincible to the ghosts for a given period of time. Each maze has its own unique bonus fruit or object with bonus points increasing as the game progresse.

:: SOLD

1980 Midway Space Invaders Deluxe Stand Up Arcade Game

100% working game. Very solid and original cabinet. Recently serviced with new caps.

:: SOLD

1980 Taito Crazy Climber

100% working game. Cabinet is in very good condition. Play human fly and scale a building while avoiding a wide variety of falling objects. Get picked up by a chopper at the top and do it all over again.

:: SOLD

1980 Taito Crazy Climber Video Arcade Upright

Game plays great. Newly serviced (new caps) monitor. Cabinet is in good condition. Play human fly and scale a building while avoiding a wide variety of falling objects. Get picked up by a chopper at the top and do it all over again.

:: SOLD

1980's Vendo V-264 Coke Machine

A nice working Vendo V-264 Coke machine. Gets nice and cold, and will vend your 6 soda choices or beer choices. All it needs is a new lock and it's ready to go. It's setup to vend either by coin or free. Original paint is under the coke wrap (can be pealed off) or left alone. Height 66, Width 32, Depth 24.37, Weight 510 lb approx, 148 6.5 oz botttles, or 260 10 oz bottles, or  252 12 oz rim cans, or 264 12 oz rimless cans.

:: ITEM NOT FOR SALE

1981 Bally Midway Solar Fox Upright Arcade Game

A very rare, cool, fun game with that 3D effect from the reflection glass. Game works flawless. Cabinet has been painted at some time in it's life, so the art work is gone. The marquee is excellent. The glass has some etching in it, but the graphics are excellent. The cardboard 3D effect is in very good condition, some tears here and there, but not noticeable. Run over or shoot "Fuzors" while ships on each of the four sides of the screen travel back and forth or up and down trying to shoot you. New coin cell...

:: SOLD

1981 Midway Galaga Stand Up Arcade Game

Games works and plays good, but only plays in green color. Has a clear plexi for monitor bezel with no cardboard or anything on the outer sides, so you can actually look down into cabinet :( Cabinet is solid with no water damage. Side art and front art is descent for its age. Control panel is worn, but all buttons and joystick work good. Full coin mechs, but currently works on free play. UPDATE: Board tested good 7-8-2011

:: SOLD

1981 Midway Galaga Stand Up Arcade Game Restofied

Excellent condition Galaga Arcade Game (restofied). The Highest Quality restoration possible. Like new, but better. New CNC Melamine cabinet by Classic Arcade Works. Complete new graphics package by Phoenix Arcade (side art, front art, control panel). All buttons, joystick, and switches are new or refurbished. All exterior metals have been powder coated. All boards, and the monitor has been gone through, recapped or replaced as needed. The powdercoated coin door has been...

:: ITEM NOT FOR SALE

1981 Midway Gorf Upright Arcade Game

Nice working game. New switching power supply from ArcadeShop has been added. High Score save kit.

:: ITEM NOT FOR SALE

1981 Midway Ms. Pac-Man Cocktail Arcade Game

A very nice 100% original Ms. Pac-Man cocktail table game. Cabinet is very nice, just some small chips in the wood grain along the bottom due to no legs, I have added new legs. The glass is very good, however the underlay has wrinkles in it, due to age and heat, but this is cosmetic and does not affect game play. All the coin mechs work. Monitor is nice and bright, looks like some capacitors have been replaced at some time.

:: SOLD

1981 Midway Ms. Pac-Man Stand Up Arcade Game

100% working game. All original, and complete. Has speed up chip installed. CPO is in excellent condition. The glass however has some graffiti etched in it, but not noticeable when playing. No screen burn. Paint has it's normal wear, but overall in great condition.

:: SOLD

1981 Midway Ms. Pac-Man Stand Up Arcade Game

100% working game. Ms. Pac-Man must eat all the dots in a maze in order to advance to the next stage. She's chased by killer ghosts but she can eat them while powered up after eating one of four large dots. Bonus points are awarded for eating the fruits and snacks that appear and wander the maze.

:: SOLD

1981 Midway Ms. Pac-Man Stand Up Arcade Game

100% working game. All original, and complete. Has speed up chip installed. No screen burn visible. Paint has its normal wear from age, but overall it is in great condition. Set on Free Play for no coins, but can be put back to a coin service.

:: SOLD

1981 Midway Omega Race Upright Video Arcade

Here is a hard to find, working 100% Midway Omega Race upright. It was released in 1980 and was intended to compete directly with the highly successful Atari Asteroids. This arcade game features a Wells Gardner 19v2000 black and white vector graphics monitor. The monitor utilized proprietary Atari technology that ultimately landed Midway Manufacturing (and Wells Gardner) into a law suit with Atari. The resultant litigation was promptly won by Atari and Midway was forced to cease production of Omega Race and pay royalties for the machines...

:: FOR SALE

1981 Universal Lady Bug Upright Video Arcade Machine

A very nice working game. Bright colors, controls work smooth. However does have a bootleg logic board, but works nicely anyways with no issues I have found. Switcher power supply. Fully working coin door. Marqueee is nicely silk screened with original artwork.

:: SOLD

1981 Universal Zero Hour Cocktail Table Arcade Game

Nice working game. Maneuver your spaceship and destroy meteorites and enemy ships falling from the top of the screen. Shooting a red meteorite awards a quadruple score. After all enemy ships have been destroyed, a landing pad will appear where you must carefully land your ship. Bonus points are awarded for a successful landing.

:: SOLD

1982 Atari Dig Dug Upright Arcade Game

A fully working game. Joystick and buttons have been cleaned and work very smooth. Control panel is nice with no wear or tear. Glass monitor bezel has paint flaking, but does not affect game play. New back door. New locks and keys, all keyed alike. Has an original REV A logic board. Sense MOD has been added to the AR II board. Cabinet is in fair shape due to someone sanding edges because it had some water swelling, and then painted with flat house paint.

:: SOLD

1982 Atari Millipede Upright Arcade Machine

A very nice clean working and original Atari Millipede game. In full working condition with Multipede kit. The cabinet is a solid 9 condition. Defend yourself from hordes of larger-than-life insects. The bugs keep coming -- all kinds -- and the challenge continues while the intensity increases. Armed only with a bow and arrows, you, as the "Archer", must fire through through a garden of enormous mushrooms to hit the giant millipede who steadily crawls right toward you. Single heads shoot out from the sides of the...

:: ITEM NOT FOR SALE

1982 Bally Midway Bump n Jump Upright Game

Working game, just needs monitor (missing chassis board). The cabinet is in excellent condition. Missing the monitor chassis board, but everything else is there and working. Bezel and glass are excellent. Side art is very good.

:: SOLD

1982 Bally Midway BurgerTime Upright Arcade Machine

A very cool fun game to play. This is a fully functioning game, and 100% original. Long story short; The game is off an HBO set where they hacked the top off to fit under something. I have the replacement pieces of wood already cut. The cabinet just needs to be cut clean, then dowled, then glued to be fixed. Then of course a paint touch up, or re-do the entire sides with a stencil (your choice). But none of this affects the game play. Marquee is excellent, the glass bezel is excellent, and the control panel overlay is superb. All original...

:: SOLD

1982 Bally Midway Tron Upright Restored

Excellent condition Tron Arcade Game (restored). The Highest Quality restoration possible. Like new, but better. New CNC Melamine cabinet by Classic Arcade Works. Complete new graphics package by Phoenix Arcade (side art, inner art, control panel). All buttons, joystick, and switches are new or refurbished, the wiring has been cleaned and gone through. All exterior metals have been powder coated. All boards, and the monitor has been gone through, recapped. The coin door has...

:: ITEM NOT FOR SALE

1982 Millipede Cocktail Table Arcade Game

I have a 100% Vintage working 1982 Millipede Cocktail Table Arcade Game. Rebuilt trackballs, new glass top with underlay, new CPO's. Trades Welcome Game Introduction Defend yourself from hordes of larger-than-life insects. The bugs keep coming -- all kinds -- and the challenge continues while the intensity increases. Armed only with a bow and arrows, you, as the "Archer", must fire through a garden of enormous mushrooms to hit the giant millipede who steadily crawls right...

:: SOLD

1982 Sega Zaxxon Stand Up Arcade Game

This game is 100% working. This game has a very nice cabinet. You pilot an attack shuttle whose mission is to strafe the enemy's "Asteroid City". Destroy fuel tanks, gun implacements, missiles, fighters and a large enemy robot. The game uses an isometric three-quarters perspective that was a unique concept to arcade games of that era.

:: SOLD

1983 Nintendo Mario Bros Upright Arcade Game

A fully functioning game, with a solid cabinet for it's age. Monitor is bright and crisp. Game tests all good.

:: SOLD

1983 Taito Ice Cold Beer Upright Arcade Game

100% working game. Just gone through, cleaned and polished the playfield. Playfield is a 10 out of 10. Glass is a 8 out of 10 because it has paint scratches (needs to be touched up). Cabinet is a 9 out of 10 because it has a small corner missing on the bottom (not noticable but fixable), Side Art is a 9 out of 10 because is has a scratch on one of them (hole).

:: ITEM NOT FOR SALE

1983 Taito Ice Cold Beer Upright Arcade Game

25 Cent Ice Cold Beer Floor Model Skill Arcade Game, Taito America Corporation, c1983, w/ key Working, Needs "O" Belts. Comes with working free play switch, original manual.

:: SOLD

1984 MTG Fire Escape Upright Arcade Machine

Nice working machine. To be restored.

:: ITEM NOT FOR SALE

1986 Williams High Speed Pinball Machine

I have a Williams High Speed available in So. CA. I just shopped it out and it's playing fast and working 100%. Cleaned and waxed the entire play field after removing top side parts. New rubbers, good plastics (only 1 minor chip), all new GI bulbs and flashers, all correct hardware, some new star posts, new beacon dome. The cabinet needs to be repainted - lots of dings, scratches, gouges and paint flaking off from sun damage. The stencils are available for those looking for a project. The backglass is...

:: SOLD

1988 Foxtronix Video Poker Upright Machine

Immaculate condition working coin-op video poker machine. Upgraded to LED bulbs throughout. This game is legal in California, since it does not have a payout. It's considered a game of skill. Model number 238, mfg date 12/88.

:: SOLD

1988 Namco Assault Stand Up Arcade Game

Game is 100% working and in excellent condition. Player's tank must obliterate 11 waves of enemy vehicles in mountain and city terrains. Top view rotates around tank, keeping orientation upward. Jump on lift pads to rise above landscape and drop devastating nukes.

:: SOLD

1988 SNK Chopper I Upright Arcade Game

100% working game. This game is in a Phoenix cabinet, and can be restored back to original. Vertically scrolling helicopter shoot 'em up. You fight choppers, tanks and boats. Shooting large choppers gives power-up, either heavier guns or special bombs. Watch out for obstacles rising from the ground.

:: SOLD

1989 Final Fight by Capcom Video Arcade Game

FUN FULLY WORKING GAME TRADES WELCOME I'm looking for: Donkey Kong, Pacman, Midway, Dragon Lair, Evil Knievel Pinball, Tron, Asteroids Cocktail Table Manufacturer: Capcom Year: 1989 Type: Videogame Class: Wide Release Genre: Scrolling Fighter Monitor: Orientation: Horizontal Type: Raster: Standard Resolution CRT: Color Conversion Class: Capcom CPS JAMMA Settings: Final Fight Dipswitch Settings Number of Simultaneous Players: 3 Maximum number of...

:: SOLD

1989 Taito Violence Fight Upright Arcade Game

100% working game. This game is in a Track and Field cabinet. Very nice solid cabinet and can be restored back to original. A one-on-one fighting game which progresses through various stages set in a city. Players choose from four different characters from the start of the game, each with their own strengths and weaknesses. Win two out of three matches to win the round and go on to the next stage.

:: SOLD

1989 Williams Police Force Pinball Machine

Police Force pinball working 100%. This is a great players game that has been well maintained and is super fast and fun. The good: The playfield is very clean and has factory mylar installed. The center ramp has been replaced with a brand new reproduction (these are no longer available) and the right ramp is an NOS ramp - both include ramp protectors. An NOS skill shot spinner was also installed. A partial plastic set is also included with the game. Most plastics are in great shape, the sling shot plastics...

:: SOLD

1991 Bally Gilligan's Island Pinball

Gilligan's Island pinball machine 1991 Bally in very good shape, works great. Full LED light kit installed, new rubber kit installed. Near flawless playfield, plastics, backglass, etc. New legs and levelers. Some minor wear to cabinet exterior (fading), looks and plays awesome. Includes original keys, keychain fob and owner's manual. New NVRAM battery eliminator Kit installed (not shown).

:: SOLD

1993 Coca-Cola Musical Bank Vending Machine

Die-cast metal collectible musical bank. Deposit a coin and hear the sound of a refreshing Coca-Cola being poured. The bottles inside shift to the left with the press of a button on the back. Depress the handle on the front to open the door and hear that popular jingle from the 60s - "Its The Real Thing." Music is very faint, and is missing the front door over bottles.

:: SOLD

1993 Coca-Cola Musical Bank Vending Machine with Box

Die-cast metal collectible musical bank. Has the original box, manual an COA. Deposit a coin and hear the sound of a refreshing Coca-Cola being poured. The bottles inside shift to the left with the press of a button on the back. Depress the handle on the front to open the door and hear that popular jingle from the 60s - "Its The Real Thing." Music dos not work due to battery corrosion (cleanable).

:: SOLD

1995 Bally Theatre of Magic Pinball Machine

Theatre of Magic pinball machine 1995 Bally in very good shape, works great. Full LED kit for playfield and backbox. New black rubber kit installed. Near flawless playfield, new translite backglass, plastics protector set, ramp protector, new magic trunk, new stainless trap door ball popper bracket, new aluminum trunk opto interupter, new Spirit Ring magnet. New Gold/Brass Plating on rails and Spirit Ring. Looks and plays awesome. Includes keys, keychain fob and owner's manual. New NVRAM battery eliminator Kit installed. New playfield...

:: ITEM NOT FOR SALE

1996 Pepsi-Cola Nostalgic Look Coin Sorter Bank. Mint In Box!

1996 Pepsi-Cola Nostalgic Look Coin Sorter Bank. Mint In Box! New old stock. Sorts quarters, dimes, nickels and pennies.

:: ITEM NOT FOR SALE

1996 Williams Big Bang Piggy Bankin' DOTMATION Slot Machine

This desirable Williams slot machine features up to 3 coin bets and 3 mechanical reels with a .25c coin hopper. That's right - real US currency. No tickets, no tokens. The very fun and entertaining part of the machine is unlike typical slots this has the large dot matrix display used for the bonus rounds and animations of the piggy while playing. The DMD is a unique feature of this type of slot machine and very similar (but larger) to what Williams used in their pinball machines of the same era. This would...

:: SOLD

1997 Namco Tekken 3 Standup Arcade Game

100% working game. A 3-D one-on-one fighting game. Choose from 18 fighters and try to become "The King of Iron Fist 3".

:: SOLD

1999 Braze Double Donkey Kong Upright Game

Nice wokring game. Cabinet is in great shape with side art.

:: SOLD

2003 Chicago Gaming Vacation America Pinball Machine

Mint condition machine. It was used to stage a new home (model home), and has little to no play use. Comes with manual, and backbox key. Vacation America is an arcade caliber pinball machine designed for the home. In every aspect including size, playability and overall appearance, this machine is on par with coin- operated pinball machines. Over 30% of moving components have been replaced with solidstate devices. The same level of high quality can found on the outside of the cabinet as well. Steel plunger, durable...

:: SOLD

7 Vintage 12oz Double Dot Pepsi Bottles Replica 1945-47

7 Double-Dot 12oz Red, White and Blue Pepsi bottles, in mint condition. that look just like the 1945-47 Shoulder Script Soda Embossed bottles back in the day.

:: SOLD

8mm Movies

Popeye in Lumberjack Heckle and Jeckle in Pirates Gold Terry Bears in Tall Timber Tales the Dapper Dalmation Keystone Cops in Keystone Hotel Kodak 200ft Movie Reel with Can

:: ITEM NOT FOR SALE

Atari 2600 Video Computer System Complete with Games and Extras

A very nice complete Atari 2600 gaming system with extras, and games. Atari 266 console, Vid-Lid, Steven lap box, 2 Joy-Sticks, 1 Flight Control, 2 Paddle Controllers, 1 Touch Pad, 24 Games with Manuals. Original Atari power supply.

:: SOLD

BK Precision 467 CRT Picture Restorer Analyzer Tube Tester

I have a good working B&K Precision CRT restorer rejuvenator. However the output cord has been cut off. So a simple molex connector and cable will need to be added for replacement. Comes as shown in the photos. It does power up and the gauges move when the dials are turned. The plastic case is in great condition. No connectors come with it, but those are available on eBay.

:: SOLD

BK Precision CRT Tester Rejuvenator 467

Test and restore color or monochrome CRTs. Test and restore most computer monitor CRTs. Test and restore most projection TV CRTs. Test emission, tracking, leakage, shorts, life. Remove shorts, clean and balance guns, rejuvenate cathodes. Continual setup chart updates and new adapter development. Rugged polyethylene case. TECHNICAL BK Precision pioneered the development of CRT testers and holds several patents on their testing circuits. We are still the leader of the industry and provide the most technical support.

:: ITEM NOT FOR SALE

Cornhole boards - New Custom made to order!

What in the world is CORNHOLE? Essentially, it’s a parking lot version of horseshoes. Believe it or not, this game has rapidly spread across the country. Just play it once and you’ll be hooked. With this set you get two 24"x48" high quality wooden cornhole boards with folding legs. This set uses cabinet grade 1/2" birch plywood tops and strong premium grade 2"x4" frames and legs. This set is ready for your finishing touches and comes fully assembled.

:: ITEM NOT FOR SALE

Ford Gumball Machine 10 cents with Glass Globe

This is a beautiful 1950's Ford Gumball machine. Has a glass globe with original silk screened logo. Metal base. Takes dimes. Does come with original lock and key, and is fully functioning to make you money. New suction cup feet have been installed.

:: ITEM NOT FOR SALE

Londoner Bristle Dart Board

New in the box with Darts included. Regulation size - 18" x 1-1/2" bristle board Official Board of the American Darts Organization (ADO) Supabull 2 - Sports engineered staple free bullseye for reduced bounce outs and maximum scoring Made from the finest East African sisal

:: ITEM NOT FOR SALE

Mouse Trap by Hasbro 2005 Board Game

Have fun playing games with your whole family using this Mousetrap Board Game. The objective is to race around the board while building mazes of contraptions to capture opponents' mice. To win, you must be the first to trap your opponent's mouse without being caught. The game benefits your children by developing fine motor skills and logical reasoning. This Milton Bradley board game includes the game board, four plastic mice, two metal marbles, 25 mouse trap building parts and 52 cheese pieces. You can create a variety of different...

:: ITEM NOT FOR SALE

Six Blocks in A Wooden Box Puzzle

The puzzle consists of six equally-sized half-cube blocks that fit into a box in only one way. It's simple, but deceptive enough to entertain people for a while until they figure it out. Pictured is one example, boxes made have slightly different variations in color and hinges, but all work the same.

:: ITEM NOT FOR SALE

Summit Coin Video Poker Machine

100% working machine. Uses quarters. Good over all condition. Will pay out on a win. Draw Poker.

:: SOLD

The Challenger 1960's Vintage Skill Game Coin Operated

This is a parts game, as it does not work properly, but is complete. 1960's coin operated amusement game called "The Challenger" It plugs into a normal household 110 volt outlet and it Operates with the use of 10 cent coins. The operator moves handle with loop from one end of the wire to the other passing through four levels of skills, lights up bright red and has a load buzzer when the wire is touched, indicating the skill level of the player and failure to make it all the way. Its in perfect working order. The game...

:: SOLD

Unknown Cocktail Table Game

Unknown Cocktail Table Game. Game plays blind, monitor has a scrambled screen.

:: SOLD

Useless Box Fully Assembled

Flip a switch and launch your very own nuclear attack with the Useless Box. Well, actually, turn the Useless Box on and this clever electromechanical box turns itself off. That's right, experience endless, useless fun with the fully assembled Useless Box. Also known as the Useless Machine. Built from the Solarbotics Useless Box Kit, we eliminate all of the work for you. Our Useless Box comes fully assembled and ready to go. Every time you flip the switch on the Useless Box, a little finger pops out and turns itself off. Sure...

:: SOLD

.022 Micro Farad Mylar Capacitor - 100 Volts DC

New 223K100V Farad Mylar capacitor. We use this on Donkey Kong Jr. logicboards and other.

:: ITEM NOT FOR SALE

1933 NOS A.B.T. Penny Coin Slide

An original vintage 1933 A.B.T. ONE CENT Coin Slide. Has the three (3) hole mount. This Coin Slide was the most commonly used model before WW II. It has the three (3) hole mount to fit almost every machine made to take a coin slide. It features three (3) point slug rejection, detecting for brass washers, ferrous metal slugs (with a built in magnet), and token rejection. When Walt Tratsch’s A.B.T. coin slide first hit the market in the early 1920s, it accepted the coin, rejected slugs and actuated the machine. Almost all the...

:: FOR SALE

1950's 10 Cent Coin Entry Plate for Pinball Game - Chromed

This is a very descent shape coin entry plate. The chrome job is ok, it actually peeled a bit by the right mounting hole. No dents, scratches, or any damage. As seen on Williams Ten Strike, Williams Pinch Hitter, and many other games.

:: SOLD

1950's 60's 10 Cent NOS Coin Entry Plate for Pinball Game

NOS William's pinball or 1950's early 1960's lock down bar .10¢ coin plate. Also used on some William's arcade machines.

:: ITEM NOT FOR SALE

1950's 60's 25 Cent NOS Coin Entry Plate for Pinball Game

NOS William's pinball or 1950's early 1960's lock down bar .25¢ coin plate. Also used on some William's arcade machines.

:: ITEM NOT FOR SALE

1950's 60's 5 Cent NOS Coin Entry Plate for Pinball Game

NOS William's pinball or 1950's early 1960's lock down bar .05¢ coin plate. Also used on some William's arcade machines.

:: SOLD

1950's NOS A.B.T. Nickel Coin Slide

This Coin Slide is the most commonly used after WW II through the 1950’s and 1960’s. It has the 3 hole mount, and universal punched hole tongue to fit almost every machine made to take a coin slide. It features 3 point slug rejection, detecting for brass washers, ferrous metal slugs (with a built in magnet), and token rejection. When Walt Tratsch’s A.B.T. coin slide first hit the market in the early 1920’s, it accepted the coin, rejected slugs and actuated the machine. Almost all the coin-op manufacturers...

:: SOLD

1957 Williams Baseball Coin Door

In very good condition. The hinge is still tight and works. No hardware included, what you see is what you get.

:: SOLD

1968 Williams Ball Park Pinball Original Back Glass

An orginal back glass from our personal game. It does have paint flaking on the bottom around the baseballs (see photo). It has been taped up to prevent any more flaking.

:: SOLD

1979 Atari Asteroids Upright Complete Part Out

I have a complete Asteroids Upright part out as listed below: Working Asteroids Game Logic Board (works but has up/down converter issues with LS191 chips) - SOLD Working Asteroids/Lunar Lander Audio Board - SOLD Complete very clean main wiring harness - SOLD Working GO5-801 monitor re-capped (works but has brightness in an out issues) - SOLD Very nice clean Asteroids Marquee - SOLD Very nice complete populated original control panel - SOLD

:: SOLD

1979 Atari Lunar Lander Empty Cabinet

A very nice original Atari Lunar Lander cabinet. Comes with a complete Owl Eye coin door, working power brick, marquee metals, and the original smoked plexi. No water damage anywhere, very solid, however it fell out of the back of a truck, and does have some top upper front corner damage, and a crack on the left side (all fixable). It is very stable, structurally sound and rigid cabinet.

:: SOLD

1980 Atari Tempest Parts

PCB tested good, sound board tested with 9 volts (should be 5), wiring harness in great condition, control panel complete, 19VLUP22 CRT works great, pulled from my personal machine.

:: SOLD

1980 Atari Tempest Stand Up Arcade Game Cabinet

I have a complete Tempest cabinet in restorable condition. Fully populated control panel in very good condition. Smoked glass. Complete coin door. Power supply and ARII Sound Board. Wiring harness is good and complete. Cabinet has a broken rear corner, but I have the broken piece.

:: SOLD

1980 Midway Pac-Man Cabaret Control Panel

A very good condition control panel for a cabaret Pac-Man. Very little wear, just on the edge where the black is. Can be touched up too look like new, or leave it alone. Overlay is included as shown.

:: SOLD

1980 Midway Space Invaders Parts

Board Rails (Plastic), all in excellent condition. Also coin bucket with bucket rails (coins included). Also a complete Midway coin door. Door is pushed in but can be straightened out, otherwise good for parts.

:: SOLD

1981 Midway Galaga Parts

Original Galaga joystick, Original Plexi Bezel, Original Glass (some flaking).

:: SOLD

1981 Midway Galaga Stand Up Arcade Cabinet

Unrestored cabinet in good condition. Bottom edges show wear, but very fixable. Just add your hardware, brackets, and components. No backdoor.

:: SOLD

1982 Bally Midway Super Pac-Man PCB

Working board. Pulled out of game in 2007.

:: SOLD

1982 Bally Midway Tron Parts

Control Panel (complete), Coin bucket bracket (painted), Original Tron Joystick, Original Translite, Leg Leveler brackets, G07 Monitor and chassis, New reproduced Lower Windshield Retainer plate (un-painted), New MCR SCSI Cables (5), Original rear handles, Original MCR Cables, New NVRAM for High Score Save

:: SOLD

1982 Bally Midway Tron PCB

Working original Tron PCB.

:: SOLD

1982 Bally Midway Tron Upright Restored Cabinet

Tron cabinet that has been restored. In perfect condition. Painted black, high grade and quality. Just needs side art, t-molding and your components.

:: SOLD

1982 Bally Midway Tron Windshield (Bezel)

No cracks or breaks, does have some graffiti etched in the lower plastic. Someone can sand this out and retexture. Needs new overlay of course.

:: SOLD

1988 Temco Silk Worm PCB

Board was working when pulled 3 years ago. No way to test. $20.00

:: SOLD

1989 Neo Geo MVS Upright Cabinet Empty

I have a nice no damaged NEO GEO cabinet. It has been gutted, so what you get is just the cabinet as shown. Great for a MAME setup or I have seen people make fish tanks out of these.

:: SOLD

1989 Taito Violence Fight PCB

Working original PCB. Pulled from game on 10-7-2011 A one-on-one fighting game which progresses through various stages set in a city. Players choose from four different characters from the start of the game, each with their own strengths and weaknesses. Win two out of three matches to win the round and go on to the next stage.

:: SOLD

1N4148 High Speed Switching Diode

The 1N4148 is a high-speed switching diode fabricated in planar technology, and encapsulated in hermetically sealed leaded glass. Set of 4 pieces DO-35 axial Ultra Fast Recovery Diode We use these on Midway Tron boards when converting over to coin-cell battery.

:: ITEM NOT FOR SALE

25 inch Arcade Game Monitor Neo Geo

I have a nice Wells Gardner 25K7191 CRT with Zenith tube. Missing the chassis board and neck board. The neck is good, still has remnants of the connector that came off. Frame is nice and straight. Came out of a NEO GEO cabinet.

:: SOLD

27C64 64Kbit UV EPROM's

M27C64, 64KBIT, UV EPROM's. Used, in good condition, no broken surface, no missing pins. Tested, Blanked, Erased, 100% Working!!

:: ITEM NOT FOR SALE

Asteroids PCB with RARE Factory Direct Rate Multiplier!

Original WORKING Asteroids PCB From 1979 with RARE 1980 factory direct Rate Multiplier Daughter board date 1980.

:: SOLD

Atari Coin Door with New Textured Powder Coating

This coin door has been textured powder coated. It's in very good condition. The side near the lock has some dents, but the face is perfect. Never mounted after being powder coated. The hinge is excellent as well. $25.00

:: SOLD

Atari Missile Command trackball rebuild kit

This trak-ball kit is used in Missile Command upright and cockpit versions as well as Atari Football (X's and O's) 2-player and 4-player models, Atari Basketball, Atari Baseball and Atari Soccer.  The kit includes the actual black trackball, two stainless steel encoder shafts and five oil lubed bearings. The trak-ball is a brand new OEM part made by the exact same manufacturer who made the original trak-ball for Atari over 25 years ago. Color, material, size and weight specifications are exact.

:: SOLD

Atari Owl Eye Coin Door Restored

This is a quality restoration on an Early Atari Owl Eye coin door. Frame and door have been black textured powder coated. All the chrome, and plated metals have been cleaned, and or polished. All wiring has been cleaned, and checked. The door fully functions with coin mechs, and lights. Plug it in and it's ready for coins. Only one issue is that the counter bolts have been broken off on the inside, however double sided tape has been added to hold the counter in place, and does not affect the appearence or function of the door.

:: SOLD

Atari Pot Keyboard Integrated Circuit (POKEY) CO12294

New AMI CO12294B-01 POKEY chips. The Pot Keyboard Integrated Circuit (POKEY) is a digital I/O chip found in the Atari 8-bit family of home computers and many arcade games in the 1980s. It was commonly used to sample (ADC) potentiometers (such as game paddles) and scan matrices of switches (such as a computer keyboard). POKEY is also well known for its sound effect and music generation capabilities, producing a distinctive square wave sound popular among chip tune aficionados. The LSI chip has 40 pins and is...

:: ITEM NOT FOR SALE

Atari Serial Number and Patents Decals

These are a remanufactured copies of the original decals that came on Atari arcade machines. These are high quality, and very close to the original as you can get for any restoration, or replacement. The serial number decals are prinited on metal material, and require a typewriter to enboss the serial number on the decal, just like the original decal. Atari USA Patent decal Atari USA 038158-04 Atari USA 035723-01 Rev. A Atari FCC White 036994-01 Priority shipping within the...

:: FOR SALE

Atari Star Wars trigger micro switches

New replacement micro swithes for the Atari Star Wars trigger and thumb switches.

:: SOLD

ATARI TEMPEST Arcade Boardset Complete

Atari Tempest XY boardset. Board that is complete but is untested. Great for a backup board, parts, or ?

:: SOLD

Bally Flipper Bushings Pair

Bally Flipper Bushing for machines made before 1985.

:: SOLD

Bally Gorf Wizard of Wor RGB Interface Board

Original, tested and working RGB Interface circuit board used in Bally Midway's Gorf and Wizard of Wor arcade games from 1980. This board is used to convert the video signal outputted by Gorf and WOW sets to a RGB output used by arcade monitors. Original Bally Midway Part# A082-91363-A000.

:: SOLD

Bally Midway Gorf/Wizard of Wor Power Supply Board

Original, untested Bally Midway Gorf / Wizard of Wor arcade game linear power supply board.

:: SOLD

Bally Midway Medium Power Supply

Original Bally Midway linear Medium Power Supply 70 VA used in games such as Super Pac-Man, Mappy, BurgerTime and Bump 'N Jump. This power supply is untested.

:: SOLD

BK Precision CRT Tester Rejuvenator 490

Test and restore color or monochrome CRTs. Test and restore most computer monitor CRTs. Test and restore most projection TV CRTs. Test emission, tracking, leakage, shorts, life. Remove shorts, clean and balance guns, rejuvenate cathodes. Continual setup chart updates and new adapter development. Extra rugged polyethylene case. TECHNICAL B+ K Precision pioneered the development of CRT testers and holds several patents on their testing circuits. We are still the leader of the industry and provide the most technical...

:: SOLD

Capacitor Tester In-Circuit - New in the Box

In-Circuit Capacitor Tester Used for measuring online capacitance resistance Ideal for lab, factory, family & wireless fans Checks all caps on board without removal. Equivalent series resistance meter Index tester meter display ESR OHMS (Top): 0 1 2 4 6 8 10 15 20 30 50 100 Infinity ESR Limits (Bottom): Dry 1-50 100 200 400 1K 10K Capacity: 1-10K MFD

:: SOLD

Cocktail Game Drum Stool - New

Ideal stools with adjustable height for any cocktail arcade game. Very confortable cusioned seat, and sturdy. This is sold as new. Quantity is available. Sold at $70.00 each plus shipping.

:: ITEM NOT FOR SALE

Coin Boxes with Lids Various

Coin Boxes for various Atari & Midway games. Available Available Sold Sold Sold Sold A good reference for what box works with what game, can be found here.

:: FOR SALE

CoinCo 903030 Slug Rejector

Manufactured by Coinco, and it probably fits many things. Identification numbers on the mech are 903030 under the Coinco logo, and to the left, 790-7.

:: SOLD

Coinco Coin Changer 9800A for Soda Machine

It accepts quarters, nickels and dimes and gives change Will fit all single price soda machines. For soda machines dating back to 50's to current models. Very reliable and seldom needs attention. However it does need a replacement electronic part, see photo for burned Coin Return Electro-magnet Ass'y.

:: SOLD

Coke Machine Wiring Harness For Models with Light or Electric Coin Mech

Wiring Harness for most models (such as CS72/96 & V81/110) that require a hot wire to the front door for fluroescent light, electrical coin mech, etc. Consists of 11' long detachable black power cord with molded plus & 2-conductor power cord (4' long-cut to length) to go from compressor motor to plastic block. Includes plastic block & leads with push-on connectors for thermostat & evaporator fan motor as well as male/female disconnect plug for lites, coin mech., etc. Includes wiring diagram

:: SOLD

DM74LS283N DIP-16 Manufactured By NSC Chip NOS

DM74LS283N NSC 16 Pin DIP 4 bit Binary Adder NOS Chip. I bought these to fix a problem on our Dig Dug board.

:: ITEM NOT FOR SALE

Electrohome GO7-FBO 13 inch Arcade Monitor

A very nice working Electrohome GO7-FBO 13 inch arcade monitor for cabaret cabinet. Pulled working from a cabaret pac-man. Shows some pac-man burn, but not noticeable when playing game.

:: ITEM NOT FOR SALE

Electrohome GO7-FBO 13 inch monitor

This is a great working monitor for a cabaret or cocktail arcade video game. Fully re-capped, solder joints re-flowed. Good for another 30 years. Some burn on the tube as shown in photos.

:: SOLD

Engraved Arcade Signs and More

Games Played At Your Own Risk No Refunds - 9" x 8" Arcade No Drinking Smoking Gambling Swearing No Soliciting - 12" x 10" Custom Signs to your Order Available

:: FOR SALE

Ford Gumball Machine Locking Bar w/ Padlock and Key

Original Ford gunabll machine antique locking bar with lock and key (Key Not Shown).

:: SOLD

Galaga Micro Switch Red Ball Handle Joystick w/ Powder Coated Mounting Plate

New Galaga Micro Switch Red Ball Handle Joystick w/ Powder Coated Galaga Mounting Plate .

:: SOLD

Galaga PCB Cap Kit

Everything you need to replace the bad capacitors on your Galaga PCB.

:: SOLD

Hitachi 13 Monitor for Taito Cocktail or Cabaret Game

A very nice no burn tube with working C14C-5090 chassis board.

:: SOLD

Hitachi 2532 32Kbit UV EPROM's

Vintage Hitachi HN462532G, 32KBIT, UV EPROM's. Used, in good condition, no broken surface, no missing pins. Tested, Blanked, Erased, 100% Working!! -450ns, or faster, or slower.

:: ITEM NOT FOR SALE

Joystick Security Bolt Set - New set of 5

Are your old screws rusty or stripped out? Security Head bolts, black oxide to replace the original for your safety and restoration. Will fit Tron, Solar Fox, Gorf, Satan's Hollow and others. These are 10-32 x 3/8 with a torx head. ...

:: ITEM NOT FOR SALE

LM324 DIP-14 TI Low Power Quad Amplifiers New

Specification: Brand new and high quality Part NO.: LM324 Size: Aprrox.19mmx6mm(LxW) Pins: 14 Used is Donkey Kong, Asteroids, Dig Dug, Bubble Bobble and many other games.

:: ITEM NOT FOR SALE

LV2000 Lite - WG6100 low-voltage power supply

New LV2000 Lite low-voltage power supply for the WG6100 used in Tempest and other games. A must have if your having issues with your monitor.

:: SOLD

Manuals and other Printed Material

Asteroids Original - SOLD Centipede Original - SOLD Millipede Original- SOLD Electronic Pinball Games Repair Proceedures Original- TRASHED Galaga Original - SOLD Flash Pinball Original - SOLD Millipede Cocktail Underlay Cards Copy- TRASHED

:: SOLD

Marquee Security Bolt Set - New set of 3

Are your old screws rusty or stripped out? Security Head bolts, black oxide to replace the original for your safety and restoration. Similar to what you find on most Midway cabinets. Marquee plates (2 sets), glass bezel (1 set), and others. These are 10-32 x 1 with a torx head. ...

:: ITEM NOT FOR SALE

Microsoft SideWinder Force Feedback Wheel

I used this maybe 3 times in the past and it was awesome. Just not into PC games anymore. Powerful 16-bit 25MHz co-processor provides lightning-fast forces to bring a new level of realism to your favorite games Full speed USB gives you quick and easy installation and set-up Easy-to-secure clamp provides a stable base for serious racing Compatible with Windows 98 SE, Me, 2000 Pro, XP Home or Professional

:: SOLD

Midway 90412 Power Supply Rebuild Kit

Everything to fix that Power Supply board on your Midway game (Tron, Spy Hunter, Etc.).

:: SOLD

Midway Arcade Coin Door Insert 25 Cents

These are brand new Midway Coin Door Inserts that are professionally reproduced. These are not something printed from a PC and glued onto plastic squares. These are as close to NOS as you are going to get.

:: ITEM NOT FOR SALE

Midway Gorf Boards and Cage

Selling an origiinal complete Gorf boardset with cage. Looks to be all there. Sold as untested for parts.

:: SOLD

Midway MCR Cable Set - Set of 5 New cables

New Flat 4 inch long 28AWG 24 POS IDC Connector to 24 POS IDC Connector cable (ie. Tron, Satan's Hollow, Spy Hunter, Tapper, etc). Comes in a set of 5. These are a build on order process. May take a few weeks before shipment.

:: ITEM NOT FOR SALE

Midway Pac-Man Filter Board Tested Working

Pulled working from a Ms. Pac-Man game. The RF filter board was meant to reduce radio frequency interference caused by the Pac-Man game. Works wth Pac-Man, Ms. Pac-Man, Galaga and a few others as well.

:: SOLD

Midway Tron/Gorf Centering Grommet New Replacement

An exact reproduction of the centering grommet used on Midway games like Tron, Gorf, Solar Fox and possible a few others.

:: ITEM NOT FOR SALE

Mills Slot Machine Back Door Reproduction

A new reproduction back door for a Mills Slot Machine. A nice sturdy stamped steel door. Will accept an original lock mech.

:: ITEM NOT FOR SALE

Monopoly Pieces - All but board and box

This is from a circa 1973 board game. The board and box where water damaged (sold upon request only). The bits and pieces are complete and in excellent condition. Money tray is not included (upon request only).

:: ITEM NOT FOR SALE

New 19VLUP22 Tube for WG6100 Atari Games

This is a GRADE A Tube with New Electron Guns and so forth. Absolutely no image burn what so ever. This is just like a NOS tube for your Tempest, Space Dual, or any other Vector game. Sorry I had the original box, but it got damaged and I tossed it. Comes with a working chassis. Just adjust the convergence and your set to go.. Wells Garner 6100 Arcade Monitor..

:: SOLD

NVRAM 16K (2Kx8) 150ns

NVRAM new in the tube. This is used on Tron in place of the battery for high score backup, and a few other games.

:: SOLD

Original Asteroids Control Panel Restored

Control panel from an original Asteroids game, that has been powder coated and a New full control panel overlay applied from ArcadeShop. This is a high quality overlay. Off of my personal restored machine. Overlay applied 1 year ago and looks like it was applied yesterday. This is for control panel only, no buttons or wiring included.

:: SOLD

Ouija Board Only in very good condition 1998 Hasbro

A VERY good condition board. The edges are good, some wear in areas. The back is perfect. No fading. Does have some pressure impressions, but not noticeable unless your looking for them. Hasbro 1998 edition board ONLY..

:: SOLD

Pacman / Ms Pacman Molex Edge Connector with Pins

New 22/44 Bally/Midway Molex edge connector with split pins. Fix your Pac for a lifeime of trouble free issues.

:: SOLD

Pacman / Ms Pacman Video Original Speed Chip

This is an Original/Slow speed chip for Pacman and Ms Pacman arcade game machines. Replaces the original 2532 chip at location F6 on the main Pacman and Ms Pacman logic boards.

:: SOLD

Pacman / Ms Pacman Video Two-Bit Speed Up Chip

This is a Two-Bit speed-up chip for Pacman and Ms Pacman arcade game machines. Replaces the original 2532 chip at location F6 on the main Pacman and Ms Pacman logic boards.

:: SOLD

Pinball New Reproduction Instruction Cards

1936 Chicago Coin Ginger (1 card) 1957 Williams Ten Strike (1 card) 1959 Williams Pinch Hitter (4 cards) 1968 Williams Ball Park (4 cards) 1957 Williams Mini Golf (1 card) 1940 Chicago Coin All American (2 cards) 1995 Bally Theatre of Magic Custom (2 cards) EM Instruction cards for the above games. Printed on Cream 65 lb Card Stock paper in same as original ink colors, just like the original. This is as close as you can get to the original style. Printed to order. ToM Instruction...

:: FOR SALE

Pitch & Bat Ball Flap - New

New Pitch and Bat ball flap unpainted. Cut from .006 spring steel. No holes drilled as each bracket maybe different. Specify which shape you need. Size is 7 1/4" x 2" rectangle. Custom size upon request. $20.00 each plus shipping, which is $5.80 Priority Mail within the USA. ...

:: FOR SALE

Razer TRON Gaming Mouse - New

The ambidextrous TRON® Gaming Mouse Designed by Razer™ is inspired by the world and vehicles of TRON, featuring light alerts based on in-game actions. The 5600dpi 3.5g laser sensor will enhance your performance and provide you with tournament grade precision that will give you boasting rights with anyone you face on the Game Grid. New in the box.. TRON Gaming Mouse Designed by Razer Unique TRON Light and Sound Features 5600dpi Razer Precision 3.5G Laser Sensor Ambidextrous Design ...

:: SOLD

RGB/CGA/EGA/YUV to VGA Arcade HD Video Converter Board

This offical Gonbes CGA/EGA/YUV to VGA Arcade HD-Converter PCB allows all types of RGB, EGA, VGA or YUV component signals to be up-converter and display on a 31KHz PC VGA monitor, TFT monitor, LCD display, or HD-TV with VGA connection. No need to set dip switches in order to figure out the specific input frequency as all inputs are detected automatically! A great alternative to purchasing a expensive, heavy CGA monitor. Use this converter with an existing computer monitor or install a lightweight LCD display or even use to build your own...

:: SOLD

Rheostat for Williams Ten Strike

Rheostat; Rest 2 Ohms; Wirewound; Pwr-Rtg 25W; Panel; Dia 1.56In; Open; Vol 500V. New in the box

:: SOLD

S.S. Minnow Bally Gilligan's Island Pinball Topper

Gilligan's Island - Minnow 14" SOLD FULLY ASSEMBLED Ready for Immediate Display Not a Model Ship kit. Inspired by the charter boat and pleasure yacht S.S. Minnow, famous from the television sitcom Gilligan's Island starring Bob Denver, this is a fine-crafted model yacht replica of the SS Minnow. 14" Long x 4" Wide x 7" High Handcrafted wooden model pleasure boat SS Minnow stencil decal on prow and stern Wooden base fitted to precisely support SS Minnow...

:: ITEM NOT FOR SALE

Sanyo 20EZ Monitor Rebuilt and Working

I have a nice working Sanyo 20EZ monitor. Fully re-capped chassis, new pots throughout. Little to no burn on CRT. Been sitting for awhile, sold as un-tested.

:: ITEM NOT FOR SALE

Serial Plate for 1950's & 1960's Vendorlator Model

Serial Plate for 1950's & 1960's Vendorlator Models. Black & silver aluminum & measures 5" X 2" & comes unstamped  with adhesive backing and or placement for screw holes (not punched).

:: SOLD

Sharp XM-2001N 19in Arcade Monitor

I have a nice working Sharp 19" Arcade monitor pulled from a Nintendo Donkey Kong Game. Also used in Atari games as well.

:: SOLD

Silk Screened Lunar Lander Control Panel and Thruster Cover - New

New panel including the hinge, die cut holes and a powder coated finish in fine texture black. Scott Evans provided the original Atari Films for the artwork. New textured vacuum formed thruster cover just like the original.

:: SOLD

Space Invaders Deluxe Glass Bezel

Very good condition. Some minor paint flaking, can be easily touched up.

:: SOLD

Switching Power Supplies - Various

I have 2 different switching power supplies. Both in working condition.

:: ITEM NOT FOR SALE

Swivel Nylon Base Levelers

Swivel Leveler (slotted bolt) Nickel Plated with White Nylon base. Base: 1-1/2" Thread: 3/8-16 Stem: 1-1/2" Overall Height: 2" $2.25 each

:: ITEM NOT FOR SALE

Theatre of Magic Playfield Rear Mirror

A very good to excellent used mirror. No scratches or any other defects. Only the mirror, brackets and other plastics not included.

:: SOLD

Theatre of Magic Playfield Tiger Saw Blade

A very good to excellent condition used saw blade. No scratches or any other defects.

:: SOLD

Toshiba 2114 RAM Chips

New Toshiba 2114L2 RAM chips. Utilized on many arcade boards: PacMan Galaga Donkey Kong Bally card cage system boards

:: ITEM NOT FOR SALE

Tron Arcade Original Plastics for Lights

These are in descent shape. No scratches, but does have typical fading of colors. Paint on backside is very good (minor touch up could be done).

:: SOLD

Used Electrohome Width Coil

A very nice looking width coil. I think we bought this for a GO7 but never used it. Does not have any markings on it to accurately identify it by a part number.

:: ITEM NOT FOR SALE

Vendo Coolers 123, 139 & 159 Manual

Vendo Coolers 123 (Junior), 139 (Standard), Vendo 159 Service & Parts Manual, 20 Pages

:: SOLD

Vintage Original A.B.T. One Cent Coin Machine Penny Slide 1950s

Coin Slide. Circa 1950s, has the three (3) hole mount. This Coin Slide was the most commonly used model before WW II. It has the three (3) hole mount to fit almost every machine made to take a coin slide. When Walt Tratsch’s A.B.T. coin slide first hit the market in the early 1920s, it accepted the coin, rejected slugs and actuated the machine. Almost all the coin-op manufacturers bought A.B.T. slides for their machines.

:: ITEM NOT FOR SALE

Walnut Wood Wood Grain adhesives Vinyl - 24in x 13ft

New roll of Walnut Wood Grain Vinyl. Perfect for a Cabaret Arcade cabinet. 24 inches wide by 13 feet long. Enough to do 2 sides and front of most cabaret game cabinets. Self-adhesive back Lay-flat, bubble free installation Can be re-lifted, repositioned and stretched Realistic Wood Grain, HIGH GLOSS Matte Stretchable with heat Conform to contours and bend easily High temperature & water resistant Install Temp: 60F to 80F (16C to 26C) End Use...

:: SOLD

Wells Garner K4900 Arcade Game Monitor

I have a nice complete working Wells Garner K4900 monitor in chassis. Has some screen burn but not noticeable when game is on. Pulled from a working game.

:: SOLD

Wells-Gardner K4900 Monitor

Complete Wells-Gardner K4900 that shows some Tron burn-in and something else. Tested working.

:: SOLD

WG6100 Monitor from Atari Tempest

Wells Gardner WG6100 - color vector/XY monitor - small dot of burn in the center. Was going to make this my test bench XY monitor but I never got around to rebuilding it. Tube is good as it was tested with my working 6100 board. However it is missing the chassis board, but does include the high voltage cage and board.

:: SOLD

Williams Baseball Bat Parts

New parts to replace that worn out bat mechanism in your Williams, or United Pitch and Bat machine.

:: SOLD

Williams Baseball Bat Parts Used

Good used bat parts. No wear shown.

:: SOLD

Williams pinball/baseball front door logo/badge

Williams logo for front coin door of pinball/baseball machines of the 50s early 60s. This logo is a remake of the original and is made of stainless steel with a laminated metal/plastic film type decal. The logo measures a little less than 2 1/2" diameter and is in excellent condition.

:: ITEM NOT FOR SALE

Williams Speaker Grill Panels - New Reproduction

These are custom bent, steel mesh speaker grills that are powder coated glossy black. The hole pattern is an identical match to the original Williams plastic grill and these fit perfectly on your original speaker panel. There are three different sizes of grills available:   Joust, Robotron, Stargate, Varkon. Sinistar, Moon Patrol, Bubbles. Defender.   $40 each plus $15.00 shipping (within the USA).

:: FOR SALE

Williams stainless steel coin door slot covers

Williams stainless steel coin doors were used on many video games and pinball machines, starting in the late 1960's through the mid-1980's. These reproduction aluminum covers are clear anodized and feature the Williams red "W" logo inside a circle.  Just as the originals, they can be used to cover coin slots in the door that are not in use.  These are an SCV Games exclusive product and not available anywhere else.  

:: FOR SALE

Wood Rail Pinball Cigarette Holder

This is a very nice original Cigarette holder for any wood rail pinball machine. No rust, not bent, ready for new chrome or leave alone as is.

:: ITEM NOT FOR SALE

Zenith GA63ADG25X 25 inch Arcade Game Monitor

Nice working Zenith 25 in monitor for a NEO-GEO cabinet. Pulled working, with no screen burn.

:: SOLD
© 2011-2017 SCV Games | Policy Stuff